air energy floor heating, also known as "air energy heat pump water heater". Air energy floor heating" absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, then increases the pressure and temperature through the compressor, and then converts it into compressed high-temperature heat energy to heat the water through the heat exchanger.
With the continuous improvement of people’s living comfort, more and more people choose to use convenient, simple, comfortable and healthy air to heat the floor.
People realize that air-based floor heating not only has the advantages of traditional floor heating, but also has the advantages of energy saving, environmental protection, and safety. Since many users are concerned about the energy consumption of air-based floor heating, we have summarized the ingenious ways of using air-based floor heating to save energy, allowing people to achieve the ultimate energy saving while enjoying health and comfort.
1. It is related to the insulation conditions of the house. If the house is well insulated, the heat loss will be further reduced, so the energy consumption will be small and the cost of use will also be reduced. If you want to install air-powered floor heating, then try your best to do the decoration and insulation measures, such as using double-layer windows or internal insulation of the outer wall to improve the insulation performance of the house.
2. How to achieve regional independent control, using a partitioned modular intelligent temperature control system, truly turn on the temperature control system to heat the required area, and completely stop unnecessary areas. As long as the sealing performance between the various areas is good, they will not affect each other. When houses with more rooms use air energy to heat the floor, provide heating according to the needs of the active area to avoid wasting resources. For example, in a living room with frequent activities, how to properly increase the temperature of the air to be heated by the floor.
3. When there are elderly and children in the home, the temperature of the room where the children and the elderly live can be adjusted appropriately, which can save costs and meet the differences in temperature and comfort among users in different regions need.
4. Pay attention to adjusting the temperature when office workers go out, set the temperature to be low when going out, around 5 degrees Celsius, set the current temperature, before leaving get off work, you can heat the air temperature controller time on the ground Increase the temperature in your home to reach the temperature you need. The time to go out is short (within a week), no need to turn off the equipment, the water temperature can be adjusted to 25-30 degrees Celsius to maintain the indoor heat storage capacity.
Under normal circumstances, how to make the air floor heating have the same service life as the house. If it is not cleaned, the heating effect and lifespan of the air floor heating will be greatly reduced. After the heating period is over, the air-energy floor heating generally needs to be maintained, tested and cleaned for about two years to ensure that the air-energy floor heating system is stable and efficient, and achieves the goals of energy saving, consumption reduction and long service life. In summary, after installing air-energy floor heating, it is best to stick to the above-mentioned tips, so as to improve the use and energy-saving effects of air-energy floor heating, and extend the service life.
online service
+86 0769-82328986
Mr. Lu/+86 13925587576
中文版
about us
company culture
Qualification
Company reality
Air energy water heater
Swimming pool constant temperature hot water unit
Ultra-low temperature hot water unit
Air energy hot water project
Industrial high temperature hot water project
Air energy heating project
Media to Electricity Project
pre-sale service
After-sales service
Service Center
feedback